MeshGuard LEL IR & CO2 IR User’s Guide
35
6.4.1.
Radio Enable/Disable
The next menu is for turning the radio on or off.
“SEt” and “ rdo” flash in alternation, to indicate that the radio can be turned on (enabled) or off
(disabled). The default value is “on.”
Press [Y/+] to enter and change the setting, [MODE] to exit and return to Detection Mode, or [N/-] to
go to the next menu.
The LCD displays the current value (enabled or disabled). Change the value if necessary.
Note:
“dIS” means disabled (radio off) and “En” means on (radio on).
6.4.2.
Enable STD or RTR
Press [Y/+] to toggle the setting from STD to RTR, and vice versa. For details on STD and RTR
modes, see page
Error! Bookmark not defined.
.
6.4.3.
Factory Setting
Press [Y/+] to return the MeshGuard LEL IR to its original factory settings.
6.4.4.
Audible & Visible Alarm Enable/Disable
Press [Y/+] to toggle between the MeshGuard LEL IR’s audible and visible alarms turned on and
off.
