. . . . .
S E T T I N G U P T H E M A X P R O N V R
Connecting the Keyboard
MAXPRO NVR Commissioning and Installation Guide
29
Connecting the Keyboard
Keyboards (all the supported models of MAXPRO NVR) can be connected to MAXPRO NVR
without any configuration.
You can also connect Honeywell’s UltraKey keyboard that represents an industry-leading
approach to intelligent, user-friendly control of video management systems. Using the
UltraKey keyboard, you can perform actions such as selecting a panel, PTZ operations,
selecting a video source such as a camera, and others in the Viewer tab.
To connect a Keyboard to MAXPRO NVR
•
The UltraKey can be connected through the Ethernet. Set the UltraKey IP Address and
System Controller (IP Address of MAXPRO NVR) through the UltraKey configuration
settings. Refer to the
UltraKey manual
for more information.
How to log on to the UltraKey Plus keyboard?
First time users of MAXPRO NVR must explicitly logon to UltraKey Plus keyboard in order to
use MAXPRO NVR.
To logon to the UltraKey Plus keyboard
1.
Power-on the UltraKey Plus keyboard.
2.
Press the
Menu
key on the LCD.
3.
Press the
MAX-1000 Setup
key on the LCD. The
Left
,
Up
,
Right
, and
Down
buttons
appear on the LCD.
4.
Press the
Ent
hard key located on the right side of the UltraKey Plus keyboard.
5.
Enter the default PIN password 1234.
6.
Press
Ent
. The UltraKey Plus keyboard is now ready for use for performing the video
management functions.
How to log off from the UltraKey Plus keyboard?
To log off from an UltraKey Plus keyboard
1.
Press the
Menu
key on the LCD.
2.
Press the
MAX-1000 Setup
key on the LCD. The
Left
,
Up
,
Right
, and
Down
buttons
appear on the LCD.
3.
Press the
Down
key.
4.
Press the
Ent
hard key twice located on the right side of the UltraKey Plus keyboard. The
logoff confirmation message appears.
5.
Press the
Ent
hard key.
Summary of Contents for MAXPRO 2.5
Page 1: ...Document 800 09355V5 04 2013 MAXPRO NVR 2 5 Commissioning and Installation Guide ...
Page 2: ...This page is intentionally left blank ...
Page 3: ...Revisions Issue Date Description 1 0 April 2013 New document ...
Page 4: ...This page is intentionally left blank ...
