Honeywell LYNX Touch 7000, Owner'S Manual, Page: 31 / 78

31 74-2760—1
Arming System from a Remote Telephone
Arming from a remote telephone will automatically select Mode 1 which will normally
be the “ALWAYS ALL ON” mode.
Disarming the System from Remote Telephone
Disarming disables all standard protection.
What You Do: What You Hear:
Call your home and enter your
remote passcode after the tone
(call a second time after two rings if
you have an answering machine or
answering service).
Welcome:
System is in mode (current number),
enter passcode to disarm.
or, system is ready,
or, system is not ready, try again later,
or, system is in alarm, enter passcode
to disarm,
or, fire alarm, enter passcode to disarm.
If the system is ready:
press
System is armed and okay, mode 1, press
pound “#” to exit.
What You Do: What You Hear:
Call your home and enter your
remote passcode after the tone
(call a second time after two rings if
you have an answering machine or
answering service).
Welcome:
System is in mode (current number),
enter passcode to disarm.
or, system is ready,
or, system is not ready, try again later,
or, system is in alarm, enter passcode
to disarm,
or, fire alarm, enter passcode to disarm.
Enter passcode a second time. Disarmed, system is ready, press 1 to
arm, press pound “#” to exit.