manualshive.com logo in svg

Honeywell KAP 140, Pilot'S Manual, Page: 8 / 137

Share
Download
Honeywell KAP 140 Pilot'S Manual Download Page 8

Table of Contents

ii

KAP 140 AUTOPILOT SYSTEM

Rev. 0

Jun/98

GPS Capture Using HSI  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
Outbound On Front Course For Procedure Turn To ILS Approach                
Using DG  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Outbound On Front Course For Procedure Turn To ILS Approach                 
Using HSI  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Front Course  ILS Approach Using DG  . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Front Course  ILS Approach Using HSI  . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Outbound on GPS Approach Using DG  . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Outbound on GPS Approach Using HSI  . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Inbound on GPS Approach Using DG . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Inbound on GPS Approach Using HSI  . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

KAP 140 Two Axis with Altitude Preselect Operation   . . . . . . . . . . . . . . . . .83

System Operating Modes   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Vertical Speed (VS) Mode   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Altitude Hold (ALT) Mode   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Altitude Alerting and Preselect   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Altitude Alerter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Altimeter Setting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Altitude Preselect   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Voice Messaging   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Operations With The KAP 140   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Takeoff And Climb To Assigned Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . .90
GPS Capture Using DG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
GPS Capture Using HSI  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Outbound On Front Course For Procedure Turn To ILS Approach                
Using DG  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Outbound On Front Course For Procedure Turn To ILS Approach                
Using HSI  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Front Course  ILS Approach Using DG  . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Front Course  ILS Approach Using HSI  . . . . . . . . . . . . . . . . . . . . . . . . . .102
Outbound on GPS Approach Using DG  . . . . . . . . . . . . . . . . . . . . . . . . . .104
Outbound on GPS Approach Using HSI  . . . . . . . . . . . . . . . . . . . . . . . . . .106
Inbound on GPS Approach Using DG . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Inbound on GPS Approach Using HSI  . . . . . . . . . . . . . . . . . . . . . . . . . . .110

KCS 55A Compass System   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

KI 525A Indicator   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
Description of Indicator and Display Functions   . . . . . . . . . . . . . . . . . . . . . .114
Slaving Meter ( KA 51B)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
KMT 112 Magnetic Slaving Transmitter   . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
KG 102A Directional Gyro   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117
Abnormal Circumstances   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119
Flight Procedures with the KCS 55A   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120

Abnormal Procedures   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

Autopilot Malfunction   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

Summary of Contents for KAP 140










































































































































Reviews:

No comments