manualshive.com logo in svg

Honeywell KAP 140, Pilot'S Manual, Page: 28 / 137

Share
Download
Honeywell KAP 140 Pilot'S Manual Download Page 28

Single Axis Operation

20

KAP 140 AUTOPILOT SYSTEM

Rev. 1

Apr/02

L

R

2 MIN.

TURN COORDINATOR

NO PITCH

INFORMATION

D.C. ELEC.

AP

G

KAP 140

HDG

NAV

APR

REV

N

33

30

W

24

21

S

15

12

E

6

3

P

U S H

PUSH

TO

FR

N

S

E

W

33

30

24

21

15

12

6

3

OBS

GS

N

A

V

ı

Approach (APR) Mode Using a
DG from HDG Mode
(45° Intercept)

The Approach (APR) mode

allows the autopilot to intercept and
track LOC,  VOR/RNAV and GPS
courses.

To arm APR mode (with the

KAP 140 currently in the HDG
mode):

1. Select the desired frequency for
LOC, VOR or RNAV. For GPS,
verify the desired approach.

2. OBS Knob - SELECT desired
approach course.  (For a localizer,
set it to serve as a memory aid.)

3.  APR Mode Selector Button -
PRESS.  Note APR ARM annun-
ciated.

NOTE: When APR is selected, the
autopilot will flash HDG for 5 sec-
onds to remind the pilot to reset the
HDG bug to the desired approach
course. Check the heading dis-
played on the DG against the mag-
netic compass and reset if neces-
sary.

Summary of Contents for KAP 140










































































































































Reviews:

No comments