Honeywell KAP 140 Pilot'S Manual Download Page 22

Page: 22 / 137

Single Axis Operation

KAP 140 AUTOPILOT SYSTEM

Rev. 1

Apr/02

2 MIN.

TURN COORDINATOR

NO PITCH

INFORMATION

D.C. ELEC.

KAP 140

HDG

NAV

APR

REV

U S H

PUSH

OBS

Navigation (NAV) Mode Using a
DG from HDG Mode
(45° Intercept)

In the navigation (NAV) mode,

the autopilot intercepts and tracks
VOR/RNAV and GPS courses.

To arm NAV mode (with the

KAP 140 currently in the HDG
mode):

1. Select the desired frequency for
VOR or RNAV. For GPS, verify
the desired waypoint or destina-
tion.

2. OBS Knob - SELECT desired
course.

3. NAV Mode Selector Button -
PRESS. Note NAV ARM annunci-
ated.

NOTE: When NAV is selected, the
autopilot will flash HDG for 5 sec-
onds to remind the pilot to reset the
HDG bug to the OBS course. Check
the heading displayed on the DG
against the magnetic compass and
reset if necessary.

Summary of Contents for KAP 140










































































































































Search results

Summary of Contents for KAP 140

Reviews:

Honeywell KAP 140, Pilot'S Manual, Page: 22 / 137

Search results

Summary of Contents for KAP 140

Reviews: