manualshive.com logo in svg

Honeywell KAP 140, Pilot'S Manual, Page: 67 / 137

Share
Download
Honeywell KAP 140 Pilot'S Manual Download Page 67

KAP 140 AUTOPILOT SYSTEM

Two Axis Operation

59

Rev. 1
Apr/02

AP

G

KAP 140

HDG

NAV

APR

REV

ALT

DN

UP

Altitude Hold (ALT) Mode

The Altitude Hold (ALT) mode

maintains the pressure altitude
acquired upon selection of altitude
hold. The ALT button toggles
between altitude hold and vertical
speed modes.

To operate in the ALT mode

(with autopilot currently in the
Vertical Speed mode):

1. ALT button - Press.  Note ALT
is annunciated and autopilot
maneuvers to maintain pressure
altitude acquired at button selec-
tion.

2.  UP or  DN button - Select to
change altitude. Incremented but-
ton strokes will move the refer-
ence altitude by 20 feet per press,
or if held continuously will com-
mand a 500 ft/min altitude change,
acquiring a new reference altitude
upon button release.

Note: Incremented altitude changes
should be limited to 500 ft. of
change.

Summary of Contents for KAP 140










































































































































Reviews:

No comments