HONEYWELL IDENTIPOINT™ INTELLIGENT SMARTCARD SYSTEM
41
95-7767
Fig. 32. IOM Address set up - S3 Settings
CONFIGURING THE
HARDWARE
The LEDs at the back of the reader glow as follows when
power is applied to the device:
•
Power - LED glows blue if power is applied to the reader.
•
Activity - LED flashes amber when Ethernet cable is
connected and Ethernet is in communication; just remains
lit in other conditions.
•
10/100 - LED glows green when it is in 100M Ethernet
mode; remains unlit in all other conditions.
The LEDs on the front of the IOM glow as follows when power
is applied to the device:
Table 12. IOM LED States and Descriptions
IOM Address = 1
IOM Address = 2
IOM Address = 4
IOM Address = 3
Color
RED
BLINKING RED
GREEN
BLINKING GREEN
AMBER *
BLINKING AMBER *
OFF
LED
Power
_
_
_
On main power
_
_
Off
Data
No
Comm.
Comm. exists
but invalid data.
Blinks when
there is
incoming invalid
data
All well
Comm. exists with
valid incoming data.
Blinks when there is
incoming or outgoing
data
Installation
state
Installation state.
Blinks when there is
incoming or outgoing
data
_
Tamper
_
Unit tampered
_
_
_
_
Unit
OK
o
p
