HONEYWELL IDENTIPOINT™ INTELLIGENT SMARTCARD SYSTEM
95-7767
42
* As the difference between the Red and Amber colors of the
LED is not significant, the user is advised to observe the
change of color from Red to Amber (or vice versa) by
comparing the LED with any other Red LED on the IOM.
IdentIPoint devices can be configured either over Ethernet or
Wi-fi.
Ethernet:
•
Only works if plugged into a DHCP enabled network
•
IP address will be shown on LCD screen
•
If no LCD screen, or some distance to the reader, then use
the IdentIPoint Sync Application to discover the reader
Wi-fi:
•
Need to create an ad-hoc network with the IdentIPoint
reader
•
IP address of IdentIPoint is 192.168.0.200
NOTE:
•
You need to have the Ethernet and wireless networks
on two different subnets and not on the same subnet
and you need to have matching routes in case a
machine is going to connect via both networks.
•
Wifi network configuration is not a UL294 listed
configuration and should not be used on UL294
applications.
Logging In
1.
Enable wireless by presenting any smart card.
2.
Create an ad-hoc network with IdentIPoint.
—
SSID is iPAC10.
3.
Call up the web interface.
—
http://192.168.0.200.
NOTE:
This mode of connecting with the reader will no
longer be available after the reader has been dis-
covered and configured by EBI. To regain this
capability, the reader's factory reset switch must
be activated. The reader can then be reconfig-
ured.
4.
Log in to the webpage using the dialog box as shown
—
User: "admin".
—
Password: "password".
—
These should be changed later.
Reader Name
1.
Enter a name for the reader
—
This will become the Point Name in EBI.
2.
Enter a description for the reader.
Hints:
—
Name the reader uniquely.
—
Use the reader description to reflect location.
Connection
1.
Choose Ethernet parameters.
2.
If using wireless, ensure data entered is 100% correct.
—
Perform a "factory reset" if anything goes wrong.
Hint:
—
Assign a well known Ethernet IP for a wireless or
stand-alone reader.