Honeywell HXMT9, Installation Manual

Page: 40 / 102

• Buzzer :
• Alarm Screen :
• Internal Relay :
• Network Relay :
• Message Latch :
• Spot Monitor 1 to 4 :
• Hold Time :
• Exit :
When set to On, the multiplexer’s internal buzzer will sound
during a video loss condition.
When set to On, the screen display will change to the
one defined in the Alarm Screen Format menu during a video loss
condition.
Selects which internal relays will be activated during
a video loss condition. 1 or 2 activates the designated relay. 1&2
activates both internal relays. Off means neither relay will activate.
When set to On, the multiplexer sends the video loss
information to an external relay box via the network during a video
loss condition.
When set to On, a “V” displays on the screen when
a video loss condition occurs. It remains on the screen until it is
cleared.
When set to On, that Spot Monitor will display
the camera with a video loss condition. When there are multiple
alarms, cameras with alarms will display sequentially. When set to
Off, that Spot Monitor’s display does not change during video loss
conditions.
This allows the user to set the actions to last from 1 to 99
seconds.
Saves your changes and returns to the previous menu.
26