HUSS-M Video Client
70
There are two tabs in the window:
Encoder
and
Decoder
.
Video encoder configuration
Click
Encoder
tab to configure HUSS-E1 video encoder.
Select an encoder in the list and click
OK
to open the
Encoder
Configuration
window of the device (see
Figure 6-31
).
Network
Click
Network
tab, network properties of the selected encoder is
displayed.
Figure 6-31 Encoder Configuration- Network
Note
It only displays the encoder’s network properties.
Refer to
Network
on page
25
to configure the network
properties.
Log
Click
Log
tab. All the modified configuration and alarm information of
the selected encoder is displayed.
Summary of Contents for HUSS-D1
Page 1: ...P N 800 01108 Rev C1 HUSS System User Guide ...
Page 2: ......
Page 8: ......
Page 96: ......
