Honeywell HSVR-16 User Manual Download

Page: 39 / 121

Honeywell

•

Record channel: You can select proper channel to record alarm video (Multiple

choices). At the same time you need to set alarm recording in schedule
interface (

Main Menu

Setting

Schedule

) and select automatic record in

manual record interface (

Main Menu

Advance

Manual Record

•

Alarm output: When alarm occurred, system enables peripheral alarm devices.

•

Delay: When input alarm is completed, system continues alarm output and/or

recording for a specified time respectively. The value ranges from 10-300(Unit:
second)

•

Tour: Here you can enable tour function when alarm occurs. It is a one-window

tour; go to chapter 5.3.9 Display for tour interval setup.

Note

If there are record channels selected, only the record channels
will be displayed in the tour.

For snapshot operation, please refer to chapter 4.4.2.

Highlight icon

to select the corresponding function. After completing all the

settings, click

Save

, and the system goes back to the previous menu.

Figure 4-20 Menu of the Local Alarm

Figure 4-21 The settings of PTZ Activation

Summary of Contents for HSVR-16

























































































































Search results

Summary of Contents for HSVR-16

Reviews:

Related manuals for HSVR-16

Brands by name

Popular brands

Honeywell HSVR-16, User Manual

Search results

Summary of Contents for HSVR-16

Reviews:

Related manuals for HSVR-16

Brands by name

Popular brands