Honeywell
40
Auto Scan Setup
In
Figure 4-30
, click
Border
. The interface is shown in
Figure 4-27
.
Please go to
Figure 4-29
, use direction arrows to select camera left limit.
Then please go to
Figure 4-35
and click left limit button
Repeat the above procedures to set right limit.
Figure 4-35 Auto Scan Setup
Activate Auto Scan
In
Figure 4-31
, click
Auto Scan
, and the system begins to auto scan.
Correspondingly, the
Auto Scan
button changes to the
Stop
button. Click
Stop
to
terminate the scan operation.
Click
Page Switch
again, and system goes back to
Figure 4-29
.
