Honeywell
48
Figure 5-10 IP Filter Menu
PPPoE
PPPoE interface is shown in
Figure 5-11
.
Input “PPPoE name” and “PPPoE password” you get from your ISP (Internet
service provider).
Click
Save
, you need to restart to activate your configuration.
After rebooting, DVR will connect to internet automatically. The IP in the PPPoE is
the DVR dynamic value. You can access this IP to visit the unit.
Figure 5-11 The PPPoE Setup Menu
NTP Setup
You need to install SNTP server (Such as Absolute Time Server) in your PC first. In
Windows XP OS, you can use command “net start w32time” to boot up NTP
service.
NTP setup interface is shown as in
Figure 5-12
.
•
Host IP: Input your PC address.
•
Port: This series DVR supports TCP transmission only. Port default value is
123.
•
Update interval: minimum value is 1. Max value is 65535. (Unit: minute)
•
Time zone: select your corresponding time zone here.
Here is a sheet for your time zone setup.
