Honeywell HS-600, Description And Installation Manual

Page: 73 / 107

SYSTEM DESCRIPTION AND INSTALLATION MANUAL
HS--600 High Speed Data System
23--20--31
30 May 2002
Use or disclosure of information on this page is subject to the restrictions in the proprietary notice of this document.
Page 5--4
Table 5-3. Typical HS--600 Maintenance Port Information (cont)
Glocom Multi Channel M4 Terminal IDU software start up...
IDU SW Version: A1.00 04/05/2002
Initializing channel 0...
copy bulletin board from flash memory ok, issue no is 23
Initializing channel 1...
copy bulletin board from flash memory ok, issue no is 23
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Waiting for LOG ON message from HTCE!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Power Control: PH(0) = 15.0
EIRP(0) = 25.0
PM(0) = 9.5
GH(0) = 58.0
Obo(0) = 2.0
Set Economy Flag = 0
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII¯
§ §
§ Press [ENTER] to start Maintenance Setting §
§ §
EIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
00.900:APP--SM |SM_CONFIG_CO |ff:ff:ff#0:Config APP OK
( 20), ISDN module buffer allocated= 1
( 40), ISDN module buffer allocated= 1
* Have found “Format B”
( 60), ISDN module buffer allocated= 1
( 80), ISDN module buffer allocated= 1
( 100), ISDN module buffer allocated= 1
* Have found “Format B”
( 120), ISDN module buffer allocated= 1
( 140), ISDN module buffer allocated= 1