Honeywell HRG161X User Manual Download Page 60

Page: 60 / 136

60 | HRG Performance Series DVR User Guide

www.honeywellvideo.com

Multi-camera Playback

1. Select the cameras from the list for which you want simultaneous playback.
2. Click to stop the ongoing video playback.
3. Click

to start multi-camera simultaneous playback.

Note

•

Up to 16 cameras can be played back simultaneously.

•

The camera list operation is accessible by mouse only. Please do not
operate by front panel.

•

If the camera numbered the lowest among the multiple cameras selected for
simultaneous playback provides no recorded files for the current day
selected on the calendar, then the warning message

Playback failed

will be displayed on the screen.

•

The video for simultaneous playback by multiple cameras selected from the
camera list refers to the all-day recorded files of the selected day.

Playback by System Log

To play back video from the System Log:
1. Click

Menu



Maintenance



Log Search

to enter the Log Search menu (see

Figure 5-6

Figure 5-6

Log Search Menu

2. Set

Major Type

Information

, set

Minor Type

Start Record

End Record

, and then

select the

Start Time

and

End Time

3. Click

Search

A list of search results is displayed.

4. Select the video log to play back, and then click

Play

The selected recording will begin to play in the Playback interface.

Summary of Contents for HRG161X









































































































































Search results

Summary of Contents for HRG161X

Reviews:

Related manuals for HRG161X

Brands by name

Popular brands

Honeywell HRG161X, User Manual

Search results

Summary of Contents for HRG161X

Reviews:

Related manuals for HRG161X

Brands by name

Popular brands