Honeywell HRG161X User Manual Download Page 116

Page: 116 / 136

116 | HRG Performance Series DVR User Guide

www.honeywellvideo.com

Figure 12-11 Firmware Update Menu

3. Select the

Local Upgrade

tab.

4. Select the firmware on the USB device.
5. Click

Upgrade

to begin the update process.

6. After the system firmware has been updated, reboot the DVR to complete the upgrade

process.

To update via an FTP server:
1. Configure the PC (running the FTP server) and the HRG DVR to be in the same Local Area

Network (LAN). Run the third-party TFTP software on the PC and then copy the firmware to
the root directory of TFTP.

2. Click

Menu



Maintenance



Upgrade

to enter the Firmware Update menu.

3. Select the

FTP

tab (see

Figure 12-12

Figure 12-12 FTP Firmware Update

4. Input the FTP server address.
5. Click

Upgrade

to begin the update process.

6. After the system firmware has been updated, reboot the HRG DVR to complete the update

process.

Summary of Contents for HRG161X









































































































































Search results

Summary of Contents for HRG161X

Reviews:

Related manuals for HRG161X

Brands by name

Popular brands

Honeywell HRG161X, User Manual

Search results

Summary of Contents for HRG161X

Reviews:

Related manuals for HRG161X

Brands by name

Popular brands