Performance Series DVR User Guide
______________________________________________________________________________________________
Document 800-02471 Rev A
73
02/09
HDD Setup
Disk Overwrite
– ENABLE / DISABLE [Select the check box to enable the DVR
to write over old data when the hard drive is full].
Disk Full Warning
– ENABLE/DISABLE [Enable Disk Full Warning for
notification when the HDD becomes full and HDD Overwrite is disabled].
Remain Time
–
0~60 [Define the amount of remaining recording time to
trigger the Disk Full Warning].
Used Space
– 80~99 [Define the percentage HDD used that triggers the Disk
Full Warning].
Disk Full Alarm
– 0~8 [Define the relay that will trigger when the HDD is full].
Disk Full Buzzer
– ENABLE/DISABLE [Enable a continuous buzzer to sound
for Disk Full Warning].
Disk Full Message
– ENABLE/DISABLE [Enable a popup message to display
for Disk Full Warning].
Sensor Setup
Sensor
Sensor
– N/O / N/C [Set sensors to Normally Open or Normally Closed].
Alarm Out
– OFF / ON [Set Relay switches to Off or On].
Note
For more information, see the
Record > Motion/Event Configuration > Sensor section.
