Maintenance
User manual for HON R100 gas pressure regulator with HON P095NG pilot
77
Proceed as follows:
Figure
Step
Description
1
Use the connecting plate (1) to secure the
pilot on the actuator assembly.
2
Reinstall all the lines (1, 2, 3, 4) you re‐
moved previously on the pilot.
3
Reinstall all the lines you removed previ‐
ously on the actuator assembly and the
pipes.
Result:
The pilot is now installed on the actuator
assembly and in the gas regulating line.
To install, follow the same steps for removal but in opposite order. Please refer to
Starting
maintenance
(see page 45) for information on how to remove the pilot and the actuator
assembly.
Proceed as follows:
Checking the system for leaks
(see page 36)
Installing components
Next task
