Honeywell HNDR-S4824 User Manual Download

Page: 37 / 80

Basic Configuration

HNDR-S4824

Honeywell

2004.05.31 (v 2.0)

< Setting Time Schedule >

In order to set time schedule, move to “System” menu.

Weekday Start/End

Press [ENTER] to access the Time Setting. Set the range for “Weekday” between Monday and Sunday

using the

◄

►

buttons. “Weekend” is set automatically based on “Weekday” range.

Day Start/End

Set the range for “Day” using the up/down buttons. The “Night” range is set automatically based on

“Day” range.

Recording Speed/Quality

There are five conditions; No Rec./Low/Standard/High/Custom.

All conditions except “Custom” synchronize “Speed (ips)” and “Quality” automatically; “Low” setting is

1ips/Q3; “Standard” setting is 5ips/Q3; “High” setting is 15ips/Q3. When using the “Custom” setting,

Speed(ips) and Quality can be set separately.

Summary of Contents for HNDR-S4824

















































































Search results

Summary of Contents for HNDR-S4824

Reviews:

Related manuals for HNDR-S4824

Brands by name

Popular brands

Honeywell HNDR-S4824, User Manual

Search results

Summary of Contents for HNDR-S4824

Reviews:

Related manuals for HNDR-S4824

Brands by name

Popular brands