Basic Configuration
HNDR-S4824
Honeywell
2004.05.31 (v 2.0)
15
3.5. Viewing an alarm triggered channel
- When an alarm is triggered, the related channel will pop-up full screen automatically.
- The pop-up duration is set in “Alarm Pop-up Hold (sec)” below the “Monitor A” menu.
- If more than one channel is triggered by an alarm, the related channels will be displayed simultaneously
in a split-screen. In order to move current screen, press any button.
<Note>
1. When Alarm Pop-up Hold (sec) is set as “Off”, this function doesn’t run.
2. When Alarm Pop-up Hold (sec) is set as “Keep”, pop-up screen keeps showing before pressing any
button.
3.6. Viewing images with Digital Zoom
- In Single Full Screen mode, live and recorded images can be expanded using the Digital Zoom feature.
- To enable the digital zoom, press the [ZOOM] button.
- Digital Zoom will expand the image to twice its normal size.
- Default location of the digital zoom is in the center of screen. The zoom box can be moved each 10
th
step to left and right and 7
th
step up and down.
- To move the zoom box, use the [Arrow] button.
- To cancel the zoom box, press the [ZOOM] button once more.
3.7. Viewing with connected PTZ
Pan/Tilt/Zoom (PTZ) devices can be controlled through the HNDR-
S4824 when a PTZ device is connected and properly configured under
“Serial Setup.”
- While in monitoring mode, press the [SELECT] button.
- Channel selection icon will be displayed.
- Move the icon to the channel to control with the [Arrow] button. (When
controlling in single full screen, select the [SELECT] button.)
- Press the [MENU] button, then PTZ menu (Pan/Tilt, Zoom/Focus, Load
Preset, Save Preset) will appear.
- Press the [ENTER] button after selecting the desired function.
