Honeywell
17
Figure 3-18
z
Enable: Click to determine whether to operate the video mask function
z
Drawing: Click
Drawing
to select the mask area.
z
Clear: Click
Clear
to delete the current channel video mask setting
After all parameters setting completed, click “Save” and the it comes into effect immediately.
Network Settings
IP Camera “Network Settings” interface as figure 3-19.
Figure 3-19
z
IPV4: IP protocol version No. is 4
z
IPV6: IP protocol version No. is 6
z
Static IP: The device IP address is permanent
z
DHCP: Click DHCP, when turn on the router’s DHCP, the camera will get the IP address from router automatically
z
IP address: Input the corresponding numbers to change the IP address
