Honeywell
13
z
Time Format: Select different time display mode for the appointed channel
z
Date Format: Select different date display mode for the appointed channel
z
Bright: Adjust the brightness for the appointed channel
z
Contrast: Adjust the contrast for the appointed channel
z
Saturation: Adjust the saturation for the appointed channel
z
Hue: Adjust the hue for the appointed channel
z
Title Location: Set the channel title location for the appointed channel
z
Date Adjustment: Set the channel date location for the appointed channel
z
Cyclotron arrow: Restore the default parameters
After all parameters setting completed, click “Save” and the it comes into effect immediately.
Encoding
IP Camera “Encoding” setting interface as figure 3-14.
Figure 3-14
z
Compress type: Main Stream(Normal)/ Sub Stream/ Main Stream(Event) selectable
z
Stream: Including complex stream/ video stream two types
z
Resolution: According to the front camera supported, how the camera resolution type supported, the corresponding resolution will
selectable
z
Bitrate Type: Constant/ Variable selectable
z
Bitrate: Set different bitrate for different channels
z
Frame Rate: Select different frame rate in the drop-down list,, default is “Full Frame”
z
Quality: Select different image quality according to your need, default is “Highest”
z
Video Encode: H.264/ MJPEG two kinds of video encode format
z
I frame Interval: Set the I frame internal time
After all parameters setting completed, click “Save” and the it comes into effect immediately. ( “
Setup
” setting will change the front
camera parameters directly)
Video Parameters
IP Camera “video Parameters” setting interface as figure 3-15.
