manualshive.com logo in svg

Honeywell HEN04102, User Manual

Share
Download
Honeywell HEN04102 User Manual Download Page 137

Configuring System Settings  |  137

800-21090V2 - A - 03/2016

Configuring Automatic Maintenance Settings

You can set up the NVR to automatically restart and/or to automatically delete old files.

To configure the auto-reboot function

1.

Go to 

Main Menu > SETTING > SYSTEM > AUTO MAINTAIN

.

Figure 10-11

Auto Maintenance Configuration Window

2.

Under 

Auto-Reboot

, select one of the following options: 

Never

, 

Everyday

, 

Every

 

Sunday

, 

Every

 

Monday

, 

Every

 

Tuesday

, 

Every

 

Wednesday

, 

Every

 

Thursday

, 

Every

 

Friday

, or 

Every

 

Saturday

, and select a time from the drop-down menu. 

3.

Click 

Apply

 to save your settings.

4.

If you want to save your settings and exit the 

SETTING

 menu, click 

OK

.

To configure to automatically delete old files

1.

Go to 

Main Menu > SETTING > SYSTEM > AUTO MAINTAIN

.

Summary of Contents for HEN04102





















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands