Honeywell HEN04101(X), User Manual

Page: 67 / 240

NVR Configurations | 67
800-18160 - B - 07/2014
Figure 3-25 Schedule Interface
Click the corresponding box to enable each function. Click OK to save the settings and
return to the previous menu.
Table 3-10 Schedule Configurations
Parameter Function
Channel Select a channel number. Select All for all channels.
Week day Select a day of the week, or All .
Pre-record The NVR has a buffer that allows it to "record" video that happens
before an event occurs. Select from
1 to 30 seconds, depending on
the bit stream.
Redundancy You can configure the NVR to backup recorded files onto two
different HDDs. Click to enable.
Note Before you can enable this function, you must configure at
least one HDD as redundant. Go to
Main
Menu

Advanced

HDD Management ).
Note This function is not available if there is only one HDD.
Snapshot Click to enable the Snapshot function, which takes a snapshot
when an alarm occurs.
Record type Select from: Regular , Motion Detection (MD) , Alarm , MD&Alarm .
Holiday Click to enable the holiday settings you configured in the General
interface. See
Configuring the General Settings on page 60 .