Honeywell HEN04101(X) User Manual Download

Page: 182 / 240

www.honeywell.com/security

182 | Performance Series Network Video Recorder User Guide

Configuring Net Alarms

Configure

Network Alarms

so that the NVR can detect alarm signals from the network. The

system does not support anti-dither and sensor type setup.

Click

Net Alarm

in the

Alarm

configuration interface to open the

Net Alarm

configuration

interface.

Figure 5-44

Net Alarm Configuration Interface

The configuration for

Net Alarms

is very similar to the configuration for

Local Alarms

. Please

see

Configuring Local Alarms on page 179

for more information.

Configuring External Alarms

Configure the

External Alarms

so that the NVR can detect alarm signals from the IP cameras.

The system does not support anti-dither and sensor type setup.

Click

IPC External Alarm

in the

Alarm

configuration interface to open the

IPC External Alarm

configuration interface.

Summary of Contents for HEN04101(X)

















































































































































































































































Search results

Summary of Contents for HEN04101(X)

Reviews:

Related manuals for HEN04101(X)

Brands by name

Popular brands

Honeywell HEN04101(X), User Manual

Search results

Summary of Contents for HEN04101(X)

Reviews:

Related manuals for HEN04101(X)

Brands by name

Popular brands