Honeywell HEN04101(X) User Manual Download

Page: 116 / 240

www.honeywell.com/security

116 | Performance Series Network Video Recorder User Guide

The

HDD Setting

configuration interface appears.

Figure 3-60

HDD Setting Configuration Interface

The

HDD No.

column shows the maximum number of HDD you can install.

If the serial number is highlighted, then you can connect to that HDD.

If the serial number is not highlighted, then you can not connect to that HDD.

Select a HDD group name from the

HDD Group

drop-down list.

The

HDD Group

column shows the

HDD Group

number of the current hard disk.

Click

to save these new settings.

Note

A HDD can belong to only one group. But one group can contain many HDDs.
The

HDD No

. corresponds to the HDD port. The

HDD Group No

. can change if

you change the HDD.

Note

When you change the

HDD Group

settings, the system will save the recorded

video and snapshots, then reboot.

Configuring HDD Channels

Click

HDD

Channel

on the

HDD MANAGE

configuration interface. The

Channel Settings

configuration interface appears.

Figure 3-61

Channel Settings Configuration Interface

Configure the HDDs for the main stream, the extra stream, and for snapshots as well. The
main and extra stream configurations for one channel can be saved to different groups.

Channel

: Displays the actual channel number for the current NVR.

Summary of Contents for HEN04101(X)

















































































































































































































































Search results

Summary of Contents for HEN04101(X)

Reviews:

Related manuals for HEN04101(X)

Brands by name

Popular brands

Honeywell HEN04101(X), User Manual

Search results

Summary of Contents for HEN04101(X)

Reviews:

Related manuals for HEN04101(X)

Brands by name

Popular brands