Honeywell HeatGenius HCE840B Instruction Manual Download

Page: 2 / 12

ABOUT CERAMIC TECHNOLOGY

SET UP

MOVING THE HEATER

10.

Warning

– This appliance has a polarized plug

(one blade is wider than the other). To reduce

the risk of electric shock, this plug is intended

to fit in a polarized outlet only one way. If the

plug does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a qualified

electrician.

DO NOT

attempt to defeat this

safety feature.

11.

Warning

–

This heater draws 12.5 amps

during operation. To prevent overloading a

circuit, do not plug the heater into a circuit that

already has other appliances working.

12.

Warning

–

It is normal for the plug to feel

warm to the touch; however, a loose fit

between the AC outlet (receptacle) and plug

may cause overheating and distortion of the

plug. Contact a qualified electrician to replace

loose or worn outlet.

13.

Warning

–

To disconnect the heater, first turn

off the product, then grip the plug body and

pull it from the wall outlet. Never pull by the

cord.

14.

Warning

–

DO NOT

insert or allow foreign

objects to enter any ventilation or exhaust

opening as this may cause an electric shock

or fire, or damage the heater.

15.

Warning

–

To prevent a possible fire,

do not

block air intakes or exhaust in any manner.

DO NOT

use on soft surfaces, like a bed, or

where openings may become blocked.

16.

Warning

–

A heater has hot and arcing or

sparking parts inside.

DO NOT

use it in areas

where gasoline, paint or flammable liquids are

used or stored.

17.

Warning

–

Use this heater only as described in

this manual. Any other use not recommended

by the manufacturer may cause fire, electric

shock, or injury to persons.

18.

Warning

–

Always plug heater directly into

a wall outlet/receptacle. Never use with an

extension cord or relocatable power tap

(outlet/power strip).

19.

Warning

–

Never tamper with this product

or attempt to fix it. Any tampering with, or

modification of this product can result in

serious injury, death, or fire. Risk of electric

shock.

DO NOT

open. There are no user

serviceable parts inside.

20.

Warning

–

DO NOT

remove product labels

that contain warnings or safety instruction.

21.

Caution

–

The output of this heater may vary

and its temperature may become intense

enough to burn exposed skin. Use of this

heater is not recommended for persons with

reduced sensitivity to heat or an inability to

react to avoid burns.

22. Caution

–

Before cleaning, or storage, or when

not in use, turn the product’s controls to the

OFF position and unplug the heater from the

electrical outlet and allow to cool.

23. Caution

–

Place the heater on a firm, level,

open surface free from obstructions and at

least 3 feet (0.9 m) away from any combustible

materials.

DO NOT

use on an unstable surface

such as bedding or deep carpeting. Be sure

the heater is not in a position where it may be

tripped over by small children or pets.

24. Caution

–

If your home has aluminum

wiring have a licensed electrician check your

receptacle’s connections. When using a 1500

watt heater, aluminum wire connections can

cause a safety issue.

25.

SAVE THESE

INSTRUCTIONS

• Ceramic heaters generate heat by passing electricity through heating wires embedded in ceramic plates.
• In the Honeywell HeatGenius

Ceramic Heater, air is drawn into the back of the heater by two fans,

through the ceramic elements and out the front of the heater to gently introduce warm air into the room.

• This type of heating technology provides consistent, even heating.
• For best results, place heater on the floor and allow heater to run for 5-10 minutes to reach maximum

heat output.

• The Honeywell HeatGenius

Ceramic Heater requires no assembly. Simply unpack heater and save all

packaging materials for off-season storage.

• Place the heater on a ﬁrm, level, open surface, free from obstructions and at least 3 feet (0.9m) away

from any wall or combustible material.

•

DO NOT

use on an unstable surface such as bedding or deep carpeting.

• BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE TRIPPED OVER BY CHILDREN OR PETS.

•  Turn off the heater.
•  Allow it to cool for ten minutes.
•  Unplug heater and move it to desired location. This heater is equipped with a Cool Touch handle for your

convenience.

• NOTE: NEVER LEAVE AN OPERATING UNIT UNATTENDED

• With heater in the OFF position ( ), plug the heater into a polarized 120V outlet.

DO NOT FORCE THE

POLARIZED PLUG INTO THE OUTLET;

it will only ﬁt one way.

• The Honeywell HeatGenius

Ceramic Heater is designed to be placed at least 3 feet away from the wall,

allowing for convection room heating and safer operation.

• Turn heater on by pressing the Power Button ( ).The Power Indicator will light and the heater will start in

the Constant HI Room Setting (Hi).

NOTE:

Because the Low settings do not require as much electricity to operate, they are more energy

efﬁcient and may be a better option if you are concerned about saving energy.

• When done using this appliance, make sure to manually turn the heater OFF.
• To shut the heater off, press the Power Button ( ) and the heater will begin Powering Down. The heater will

shut off after counting down 6 seconds in the Temperature Display to cool down the internal components.

• See next section for overview of heat settings.

OPERATION

Power

Button

2 Hour Auto-off Timer

with 30 minute

phased intervals

Low Heat &

White Noise

Setting

Thermostat