Honeywell HD44IP, User Manual

Page: 24 / 84

24
Installation and Setup
Note You can connect your camera to a network or use any type of CAT5 cable to
connect it directly to a PC or laptop.
Mounting the Camera
Surface Mount
1. Secure the skirt to the ceiling (using
appropriate screws, not supplied) or to the
wall using the supplied screws.
Note When mounting, you must use screws
that are able to support at least three
times the weight of the camera.
2. Connect the wires (see Connecting the
Wiring on page 21 ).
3. Rotate and align the yellow label ( )
on the camera assembly with the yellow
label on the skirt.
4. Secure the camera assembly to the skirt by
pushing it into the skirt, then twisting it
clockwise until it clicks securely into place.
5. Adjust the camera’s field of view, as
needed (see Adjusting the Camera: FOV
(Field of View) and Focus on page 24 ).
6. Install the turret by clicking it into place.
7. Install the bubble by placing it on the camera with the tabs to the left of the slots, then
turning it clockwise until the tabs click securely into place.
Adjusting the Camera: FOV (Field of View) and Focus
Adjusting the Field of View
To adjust your camera’s field of view:
1. Verify that power is supplied to your camera.
Skirt
Camera
assembly
Turret
Dome bubble
Screws
(supplied)