Configuring the Camera | 23
800-12004V2 - A - 01/2013
Motion Detection
1.
When the SPECIAL menu is displayed, use the Up or Down OSD controls to access
the MOTION DETECTION menu (see
Figure 25
).
Figure 25
SPECIAL Menu - MOTION DETECTION Submenu Selection
2.
Configure the Motion Detection settings (see
Figure 25
) as follows:
ALARM
Options are ON and OFF. Select whether motion will activate a visible onscreen
alarm.
AREA ON
The area(s) that will be monitored for motion can be set by changing the TOP,
BOTTOM, LEFT and RIGHT values.
a.
Select
AREA
in the MOTION DET menu and press
SET
to open the MOTION
AREA menu (see
Figure 26
).
b.
In this menu, select the motion detection area to be adjusted (from AREA1 to
AREA4) and press
SET
to open the AREA1~4 menu.
c.
Use the Up, Down, Left and Right OSD controls to change the TOP,
BOTTOM, LEFT and RIGHT values, as needed.
d.
Select
RETURN
and press
SET
to save the area.
Figure 26
MOTION DETECTION AREA Adjustment
MOTION DET
ALARM
ON
AREA
SENSITIVITY
025
DISPLAY
OFF
HOLD TIME
003
RETURN
SPECIAL
CAMERA TITLE OFF
ADJUST
MIRROR
OFF
MOTION DET
OFF
PRIVACY
OFF
SYNC
INT
RESOLUTION
NORMAL
RESET
NO
RETURN
MOTION AREA
AREA1
ON
AREA2
ON
AREA3
ON
AREA4
ON
RETURN
AREA1~4 ON
TOP
25
BOTTOM
65
LEFT
30
RIGHT
80
RETURN
