Honeywell HCC484TP, User Manual

Page: 11 / 196

Rev 1.01 3 900.0512
07/06
English
Lens Installation
Installing a C/CS Mount Lens
1. Remove the protective cap from the front of the camera.
2. Adjust the C/CS mount ring for either C or CS mount.
a. Loosen the setscrews using the L-type wrench supplied.
b. Turn the mount ring counterclockwise for a C-mount lens
or clockwise for a CS-mount lens.
c. Tighten the setscrews.
3. Press the threaded portion of the lens mount against the
threaded portion of the camera mount and slowly screw the
lens clockwise until secure.
Figure 2 C/CS Mount
Installing an Auto Iris Lens
1. Remove the cover of the auto iris lens plug and connect with
the lens cable.
2. Connect the auto iris lens plug to the 4-pin lens terminal on the
side of the camera.
C
CS
Setscrews (x2)