Honeywell FF-SRE6029 Instructions For Use Manual Download Page 5

 

ELECTRICAL INSTALLATION

 

 

4

  

 

 

 

 

 

 

 

 

 

107137-20 -EN  FR26  GLO  305  Printed in Germany

 

ELECTRICAL SHOCK 

Remove power from FF-SR Series control modules and 
machine during installation. 

Failure to comply with these instructions could 
result in death or serious injury.

 

 

Multiple  wiring  configurations  are  possible  for  the           
FF-SRE6029 extension control module and only general 
guidelines are provided in this installation manual.  
 

Refer to the important application warnings (page 5) 
and the application examples (pages 6 through 7) for 
more details. 

 

FIGURE 7. TERMINAL ARRANGEMENT 

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

FUNCTIONAL DESCRIPTION 

In the case of an emergency stop condition, the safety 
device connected to the FF-SRE6029  module is actuated  
and the internal safety relays K1 and K2 de-energise. The 
normally open safety contacts (13/14…43/44) will open 
and the normally closed safety contacts (51/52) will close.  
 
The emergency stop condition is signalled to the machine 
control circuitry by the module’s safety contacts to stop the 
hazard and remove power. 
 
As soon as the safety device is released, power is applied 
to A1(+)/A2(-), A3(+)/A4(-) and the relays K1 and K2 
energise. The normally open contacts will close and the 
normally closed contact will open.  
 
Both relays K1 and K2 must be energized to have the 
normally open contacts in a closed condition. If one of the 
safety relays de-energizes, the normally open contacts will 
open.  

 

One or more FF-SRE6029 Extension Modules can be 
cascaded or external contactors with positive guided 
safety contacts can be used to increase the number of 
contacts. 
 
If multiple safety contacts are used in parallel with one 
load, the maximum admissible current can be increased.

 

 
LED INDICATORS 

The FF-SRE6029 module has two green LED status 
indicators (K1 and K2) as illustrated in Figure 8. 
Illuminated K1 and/or K2 LEDs indicate(s) that the 
corresponding internal safety relay is energized.  

 
FIGURE 8. MODULE FRONT PANEL 
 

13

14

23

24

34

44

A3
(+)

A4

(-)

Y1

Y2

33

43

A1
(+)

A2

(-)

51

52

K1

13 23 33 43

51

52

Y1

14 24 34 44

Y2

K2

Honeywell

FF-SRE60292

 

 

FSR

E

6029

10 

Summary of Contents for FF-SRE6029











Reviews: