Honeywell FF-SRE6029 Instructions For Use Manual Download Page 10

 
 

 

WARRANTY AND REMEDY 

Honeywell warrants goods of its manufacture as being free 
of defective materials and faulty workmanship.  Contact 
your local sales office for warranty information.  If 
warranted goods are returned to Honeywell during the 
period of coverage, Honeywell will repair or replace without 
charge those items it finds defective.  The foregoing is 
Buyer’s sole remedy and is 

in lieu of all other warranties, 

expressed or implied, including those of 
merchantability and fitness for a particular purpose. 

 

 

 

Honeywell  

21, chemin du Vieux Chêne 
38240 Meylan 
France

 

 

 

 

 

While we provide application assistance, personally and 
through our literature and the Honeywell Website, it is up to 
the customer to determine the suitability of the product in 
the application. 
Specifications may change at any time without notice.  The 
information we supply is believed to be accurate and 
reliable as of this printing. However, we assume no 
responsibility for its use. 
 

 

TELEPHONE 

+ 61 (0) 2 9370 4500 

Australia 

+ 33 (0) 1 60 19 80 40 

France 

+ 49 (0) 69 8064 444 

Germany 

+ 34 91 313 61 00 

Spain 

+ 1-815-235-6847 

International 

+ 44 (0) 1698 481 481 

UK 

+ 1-800-537-6945 

USA & Canada 

FAX 

+ 61 (0) 2 9370 4525 

Australia 

+ 33 (0) 1 60 19 81 73 

France 

+ 49 (0) 69 8064 442 

Germany 

+ 34 91 313 61 29 

Spain 

+ 44 (0) 1698 481 676 

UK 

+ 1-815-235-6545 

USA & Canada 

 

INTERNET 

http://www.honeywell.com/sensing/ 
[email protected]

 

©  2005 Honeywell International Inc.  
All rights reserved. 

 

 
ORDER GUIDE 

 

 

FF-SRE6029

2 = 24 Vac/dc

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for FF-SRE6029











Reviews: