Honeywell FDAP3P, Manual

Page: 30 / 96

28 www.honeywell.com
3 FDAP INSTALLATION
3.10 Mount the FDAP1/FDAP2
The assembled
FDAP1/FDAP2
, along with antennas and lightning suppressors (if required) can be mounted in
its site location. The
FDAP1/FDAP2
enclosure can be mounted on a 2-inch pole or on a wall using the
appropriate optional mounting kit that is available with the unit.
3.10.1 Pole mounting
When pole mounting the
FDAP1/FDAP2
, you can assemble and install the mounting hardware at the site. The
mounting kit includes the following items:
(1) Mounting plate
(2) U-bolts with nuts
(3) Screws (to attach the
FDAP1/FDAP2
to the mounting plate)
The pole mounting kit comprises of mounting plate, U-bolts, and nuts as displayed in “Figure 5: Pole
mounting”. When using the mounting plate for the pole installation, secure the
FDAP1/FDAP2
to the bracket
using the screws supplied with the bracket kit. The
FDAP1/FDAP2
can be mounted to the left or to the right of
the pole using the same mounting hardware. It can also be mounted in line with the pole. However, if the
integral antennas are too close to the pole, it might cause RF communication problem. For inline mounting,
the
FDAP1/FDAP2
integral antennas should be on the top of the mounting pole.
Figure 5: Pole mounting