Honeywell EQUIP HD4HDIH, User Manual

Page: 56 / 90

56
IP Camera Web Client
Configuring the Compression Settings
1. On the Compression Settings tab, in the Statistics area, select the Received check
box to receive in real time the bit rate and frame rates for the current image.
Deselecting the check box disables the refresh rate.
Note The Received check box is disabled by default. When you log out, this check
box reverts to the disabled state.
2. Use Table 4-3 to set up the streaming resolution and Table 4-4 for the other
compression settings.
Table 4-3 Video Streaming Resolutions
Primary Stream Resolutions Secondary Stream Resolutions
1920 x 1080 (HD4HIDH only)
1280 x 720
800 x 450
640 x 360
320 x 180 640 x 360
320 x 180
Table 4-4 Compression Settings
Setting Options Description
Frame Rate 1–30 (NTSC)
1–25 (PAL) The frame rate that is displayed per second. For NTSC, select from 1 fps (lowest)
to 30 fps (highest). For PAL, select from 1 fps (lowest) to 25 fps (highest).
Priority Quality, Bit Rate,
Frame Rate Allows you to set the maximum bit rate and/or target rate value, based on priority
mode settings. This value is the threshold that you do not want the bit rate to
exceed. The Secondary Stream is configurable for Quality and Bit Rate only.
.
Select this Priority
field setting Field Setting Description
Quality
(see Figure 4-11 )
Maximum Bit Rate
The Target Bit Rate field
is grayed out. The camera maintains the picture quality until the
bit rate delivered exceeds the Maximum Bit Rate
(MBR), at which point the camera drops frames to
ensure that the MBR is not exceeded.
Bit Rate
(see Figure 4-11 )
Target Bit Rate
Maximum Bit Rate and
Compression Ratio fields
are grayed out. The camera adjusts the picture quality to ensure
that the bit rate delivered does not exceed the
Target Bit Rate (TBR), at which point the camera
drops frames to ensure that the TBR is not
exceeded.
Frame Rate
(see Figure 4-11 )
(Not available for
Secondary stream)
Target Bit Rate
Maximum Bit Rate and
Compression Ratio fields
are grayed out. The camera maintains the selected frame rate
while adjusting image quality to meet the TBR. This
mode allows the actual bit rate to fluctuate beyond
the user-defined TBR while maintaining the
selected frame rate.