Honeywell Dolphin 60s, User Manual

Page: 41 / 144

3 - 11
• Dolphin 60s HomeBase Device (Model D60s-HB) , see page 12-1
• Dolphin 60s Mobile Charger Devices , see page 13-1
• Dolphin 60s USB Charge/Communication Cable (Model USB-WALL-CHARGER-1), see page 2-2
When the main battery is not installed in the terminal:
• Place the battery pack in the Auxiliary Battery Well of the Dolphin 60s HomeBase Device (Model D60s-
HB) .
For information on how to remove the battery from the terminal, see Replacing the Main Battery on page
2-12.
Charging Time
Important Charging Guidelines
Source Current Specifications
Battery charging times can be significantly lengthened or charging may not occur if the terminal is
drawing more currant than is supplied by the charging peripheral (e.g., HomeBase), USB wall charger, or
USB Host (e.g., workstation PC).
• The maximum current supplied through a charging peripheral is 2.0A.
• The maximum current supplied by the USB wall charger is 900 mA.
• The maximum current supplied by a USB Host can vary from 100mA to 500mA.
Do not attempt to charge the terminal from a 100 mA source. An active Dolphin terminal uses more
current than supplied by a 100 mA source causing the terminal to continue to draw power from the
battery.
Note: Placing the terminal in Suspend mode while charging reduces the current draw of the terminal and shortens
the charging time of the battery.
To verify your terminal is not drawing more current then supplied by the charging source:
1. Touch > Settings > System > Battery when the terminal is connected to a
charging source.
Charging Peripheral/Accessory 60s-BATT-1
HomeBase (Model D60s-HB) 6 hours
Mobile Charger (Model 60s-MC) 6 hours
Mobile Charger with DEX Cable (Model 60s-DEXKIT) 6 hours
Mobile Charger with DB9 Cable (Model 60s-DB9KIT) 6 hours
USB Charge/Communication Cable with provided
power supply (Model USB-WALL-CHARGER-1) 6 hours
USB Charge/Communication Cable (Model USB-
CABLE-1) connected to a workstation (PC) 500mA
USB port 8 hours