3
The Sampler
Safety Information - Read First
Short sample tube (inlet)
Block trigger
Activation button
C
Cowl
Water trap
Drain plug
Filter plug
Tube fitting (outlet)
Audible alarm
Red
FAIL
LED
Green
ON
LED
Yellow
BLOCK
LED
Pushbutton
Action
Description
C
Activate
Press
C
to activate.
Deactivate
Press
C
and hold for 2 seconds to deactivate. The
Sampler beeps, then deactivates. The Sampler
enters calibration mode the next time it is activated.
Calibration
• Confirm that the Sampler is on.
• Press and hold
C
for 6 seconds to start
calibration.
• The Sampler beeps, then deactivates. The
Sampler enters calibration mode the next time it is
activated.
Airflow
To block airflow through the Sampler, firmly press the
block trigger.
Note:
Airflow can also be
blocked by tempo-
rarily kinking the
hose or covering the
end of the rigid tube.
LED
Status
Description
Green
ON
Indicates the Sampler is operating properly.
Yellow
BLOCK
Prompts you to block the airflow.
Red
FAIL
Indicates that the Sampler is in an error condition.
