Honeywell CF3680, User Manual, Page: 65 / 203

N3680 Decoded Engine User Guide 49
Output Sequence Example
In this example, you are scanning Code 93, Code 128, and Code 39 bar codes, but
you want the scanner to output Code 39 1st, Code 128 2nd, and Code 93 3rd, as
shown below.
Note: Code 93 must be enabled to use this example.
You would set up the sequence editor with the following command line:
SEQBLK62999941FF6A999942FF69999943FF
To program the previous example using specific lengths, you would have to count
any programmed prefixes, suffixes, or formatted characters as part of the length. If
you use the example on
page 49 , but assume a <CR> suffix and specific code
lengths, you would use the following command line:
SEQBLK62001241FF6A001342FF69001243FF
A - Code 39
B - Code 128
C - Code 93
SEQBLK sequence editor start command
62 code identifier for Code 39
9999 code length that must match for Code 39, 9999 = all lengths
41 start character match for Code 39, 41h = “A”
FF termination string for first code
6A code identifier for Code 128
9999 code length that must match for Code 128, 9999 = all lengths
42 start character match for Code 128, 42h = “B”
FF termination string for second code
69 code identifier for Code 93
9999 code length that must match for Code 93, 9999 = all lengths
43 start character match for Code 93, 43h = “C”
FF termination string for third code
SEQBLK sequence editor start command
62 code identifier for Code 39
0012 A - Code 39 sample length (11) plus CR suffix (1) = 12