Honeywell CENTRA LINE EAGLEHAWK Installation & Commissioning Instructions Download Page 5

Page: 5 / 32

EAGLEHAWK CONTROLLER – INSTALLATION & COMMISSIONING INSTRUCTIONS

EN1Z-1005GE51

R0216

Bus and Port Connections

Overview

WARNING

Risk of electric shock or equipment damage!

►

Do not touch any live parts in the cabinet!

►

Disconnect the power supply before making connections
to or removing connections from terminals of the
EAGLEHAWK controller or Panel Bus I/O modules.

►

Do not reconnect the power supply until you have
completed installation.

►

It is prohibited to power the EAGLEHAWK controller with
the same transformer used to power other controllers or
devices (e.g., the PW M-Bus Adapter).

►

Observe the rules regarding electrostatic discharge.

24 25 26

27 28 29 30 31 32

24V

-0

24V~

ND1

485-1+

485-1-

485-2+

485-2-

232

RS485-1

BIA

Fig. 2. Top view

Fig. 3. Side view

Legend

1 RS232 / RJ45 socket (for connection of M-Bus and

other RS232-based protocols; factory debugging)

2 USB 2.0 Host Interface (for connection of the IF-LON);

max. 500 mA, high speed

3 Ethernet / RJ45 socket (for BACnet IP communi-

cation); 10/100 Mbit/s; 1 "link" LED and 1 "activity"
LED

4 RS485-1* (isolated; for BACnet MS/TP, Panel Bus, or

Modbus RTU communication)

5 RS485-2* (non-isolated; for BACnet MS/TP, Panel

Bus, or Modbus RTU communication)

LEDs

7 USB 2.0 Device Interface (for connection to COACH

web browsers, and 3

-party touch panels)

8 Three-position slide switch (for setting bias and

termination resistance of RS485-1)

Future

functionality

*Modbus RTU Master/Slave communication is possible on
either or both of the two RS485 interfaces.

WARNING

Risk of electric shock or equipment damage!

►

It is prohibited to connect any of the RJ45 sockets of the
EAGLEHAWK controller to a so-called PoE-enabled device
("

ower

ver

thernet").

RS232 / RJ45 Socket

Via its RS232 / RJ45 socket, the EAGLEHAWK controller can
be connected (using an XW586 cable) to a PW M-Bus
Adapter and thus to M-Bus networks. See also section "M-
Bus Connection" on pg. 25.

RS232-RJ45 SOCKET

Fig. 4. RS232 / RJ45 socket

USB 2.0 Host Interface

Via its USB 2.0 Host interface, the EAGLEHAWK controller
can be connected to, e.g., the IF-LON External Interface
Adapter and thus to L

ORKS

networks. Max. 500 mA, high

speed. See also section "LonWorks Communications" on pg.
19.

Summary of Contents for CENTRA LINE EAGLEHAWK

































Search results

Summary of Contents for CENTRA LINE EAGLEHAWK

Reviews:

Related manuals for CENTRA LINE EAGLEHAWK

Brands by name

Popular brands

Honeywell CENTRA LINE EAGLEHAWK, Installation & Commissioning Instructions

Search results

Summary of Contents for CENTRA LINE EAGLEHAWK

Reviews:

Related manuals for CENTRA LINE EAGLEHAWK

Brands by name

Popular brands