manualshive.com logo in svg

Honeywell BENDIX/KING KLN 90B, Installation Manual, Page: 33 / 152

Share
Download
Honeywell BENDIX/KING KLN 90B Installation Manual Download Page 33

BENDIX/KING

KLN 90B

Rev 5, April/2003

10521I05.TDC

Page 2-5

H. Pin 13; RS 232 Out

The KLN 90B outputs data in RS 232 format on this pin. It can be used to inter-
face with certain types of ELT’s, fuel sensors, and moving map displays, and 
fuel management systems. For specific label information, refer to 

Appendix A

.

I. Pin 14; WPT ALERT

Pin 14 is the Waypoint Alert annunciator output. This output is tied to a remote 
annunciator lamp. When the line is pulled low the annunciator lamp will illumi-
nate. The annunciator will be on whenever waypoint alerting is occurring. For 
more complete information refer the KLN 90B Pilots Guide, P/N 006-08773-
0000.

J. Pin 15; MSG

Pin 15 is the Message annunciator output. This output is tied to a remote annun-
ciator lamp. When the line is pulled low the annunciator lamp will illuminate. The 
annunciator will be on whenever the message prompt on the KLN 90B is on. For 
more complete information refer to the KLN 90B Pilots Guide, P/N 006-08773-
0000.

K. Pin 16; APPROACH ACTIVE

Pin 16 is the Approach Active annunciator output. This output is tied to a remote 
annunciator lamp. When the line is pulled low the annunciator lamp will illumi-
nate. The annunciator will be on whenever the unit is in the approach mode. For 
more complete information refer the KLN 90B Pilots Guide, P/N 006-08773-
0000.

L. Pin 17; APPROACH ARM

Pin 17 is the Approach Arm annunciator output. This output is tied to a remote 
annunciator lamp. When the line is pulled low the annunciator lamp will illumi-
nate. The annunciator will be on whenever the unit is in the approach arm mode. 
For more complete information refer the KLN 90B Pilots Guide, P/N 006-08773-
0000.

M. Pin 18; Nav Super Flag

Pin 18 is the GPS NAV Super Flag output. A logic high shall be > 18 VDC when 
the voltage at pin 40 is > 24.8 VDC. A logic high shall be > 10 VDC when the 
voltage at pin 40 is > 12.4 VDC. A logic high shall be > 20 VDC when the voltage 
at pin 40 is + 27.5 VDC. A logic low 
shall be < 3.5 VDC.

N. Pins 19, 20, 21, 22, and 25; NAV Flag +, +From, +To, + RIGHT, and +LEFT/

NAV Flag -

These outputs function like the outputs from standard navigation converters. For 
the specifications on these outputs refer to

 

Paragraph 1.3.2 in Section 1 of this 

manual.

Summary of Contents for BENDIX/KING KLN 90B

























































































































































Reviews:

No comments