Honeywell BENDIX/KING KLN 90B Installation Manual Download Page 22

Page: 22 / 152

BENDIX/KING

KLN 90B

Page 1-16

10521I05.TDC

Rev 5, April/2003

KLN 90B Ann. Set

(28 V. Ltg.)

NAV/GPS Sw. Ann.

031-00785-0711 or (031-00763- 0711)

WPT/MSG Ann.

031-00785-0505 or (031-00763- 0505/-0718)

GPS CRS OBS/LEG

Sw. Ann.

031-00785-0778 or (031-00785-0763)

GPS APR ARM/ACT

Sw. Ann.

031-00785-0766

KLN 90B Ann. Set (14 V. Ltg.)

NAV/GPS Sw. Ann.

031-00785-0712 or (031-00763- 0712)

WPT/MSG Ann.

031-00785-0762 or (031-00763- 0762/-0719)

GPS CRS OBS/LEG

Sw. Ann.

031-00785-0779 or (031-00785-0764)

GPS APR ARM/ACT

Sw. Ann.

031-00785-0767

KLN 90B Ann. Set ( 5 V. Ltg.)

NAV/GPS Sw. Ann.

031-00785-0713 or (031-00763- 0713)

WPT/MSG Ann.

031-00785-0506 or (031-00763- 0506/-0720)

GPS CRS OBS/LEG

Sw. Ann.

031-00785-0780 or (031-00785-0765)

GPS APR ARM/ACT

Sw. Ann.

031-00785-0768

KLN 90A Upgrade to KLN90B Approach Set

If a KLN 90A is upgraded to a KLN 90B, the additional GPS CRS and GPS APR switch/annunci-
ators are needed.

KLN 90B with EFIS Approach Set

Most EFIS systems will provide NAV/GPS switching and WPT/MSG annunciation but still require
external GPS CRS and GPS APR switch/annunciators.

NOTE

The GPS CRS OBS/LEG switch annunciators were

available in two different color configurations. Both

versions were approved for use with the GPS’s. The

white OBS was the preferred version.

The 031-00785-0763/0764/0765 versions were visible white for the GPS CRS
field, yellow for the OBS field and green for the LEG field.

The 031-00785-0778/0779/0780 versions were visible white for the GPS CRS
field, white for the OBS field and green for the LEG field.

Summary of Contents for BENDIX/KING KLN 90B

























































































































































Search results

Summary of Contents for BENDIX/KING KLN 90B

Reviews:

Honeywell BENDIX/KING KLN 90B, Installation Manual, Page: 22 / 152

Search results

Summary of Contents for BENDIX/KING KLN 90B

Reviews: