manualshive.com logo in svg

Honeywell BENDIX/KING KLN 90B, Installation Manual, Page: 137 / 152

Share
Download
Honeywell BENDIX/KING KLN 90B Installation Manual Download Page 137

BENDIX/KING

KLN 90B

Rev 5, April/2003

10521I05.TDC

Page C-5

GPS Rec. error 
Codes

Definition

Suggested Action

RCVR Hardware 
Error: 1000

RS-232 Channel 2 
Failure: The second 
RS-232 UART on the 
receiver failed the 
loop-back test. This 
self-test can only be 
enabled during test 
mode on the receiv-
er, and should not be 
seen in normal oper-
ation.

It could be one of the following, in the order of prob-
ability:
1. The receiver was put in test mode without looping 
back the two serial ports.
2. Bad ASIC or Microprocessor on the Receiver 
Board.

RCVR Hardware 
Error: 2000

BBP Underflow: The 
baseband process-
ing loop detected an 
error in the 1 mS pro-
cessing loop.

It could be one of the following, in the order of prob-
ability:
1. The flex cable between the Receiver Board and 
Main Board may have come out of the socket in the 
GPS.
2. Bad TCXO, MMIC, or ASIC on the Receiver 
Board.

RCVR Hardware 
Error: 8000

BBP Overflow: The 
baseband process-
ing loop detected an 
error in the 1 mS pro-
cessing loop.

It could be one of the following, in the order of prob-
ability:
1. The flex cable between the Receiver Board and 
Main Board may have come out of the socket in the 
GPS.
2. Bad TCXO, MMIC, or ASIC on the Receiver 
Board.

Summary of Contents for BENDIX/KING KLN 90B

























































































































































Reviews:

No comments