manualshive.com logo in svg

Honeywell BENDIX/KING KLN 90B, Installation Manual, Page: 24 / 152

Share
Download
Honeywell BENDIX/KING KLN 90B Installation Manual Download Page 24

BENDIX/KING

KLN 90B

Page 1-18

10521I05.TDC

Rev 5, April/2003

FOUR FIELD ANNUNCIATORS (WPT/MSG/---/---)

LIGHTING Honeywell 

P/N

28 V 

031-00763-0718

14 V 

031-00763-0719

5 V 

031-00763-0720

NOTE: (WPT) AND (MSG) will be in amber color and the dashes in green. These an-

nunciators will be deadface and readable only when lit. Dashes will only be lit 
during an annunciator test as a function of the aircraft installation.

TWO FIELD ANNUNCIATORS (WPT/MSG)

LIGHTING Honeywell 

P/N 

Honeywell 

P/N

28 V 

031-00763-0505 

031-00785-0505

14 V 

031-00763-0506 

031-00785-0506

5 V 

031-00763-0762 

031-00785-0762 

(Eaton Series 584) 

(Eaton Series 582)

NOTE: (WPT) AND (MSG) will be in amber color. These annunciators will be deadface 

and readable only when lit.

GPS CRS, OBS/LEG Switch/Annunciator

The KLN 90B may operated in either of two modes, LEG or OBS. In LEG mode, the flightplan legs 
will automatically sequence as determined by present position. In OBS mode, the active waypoint 
and inbound or outbound course will be manually selected. The Remote OBS/LEG Switch/Annun-
ciator is recommended for non-precision approaches to reduce pilot workload.

The selection of OBS or LEG may be accomplished in either of two methods.

Method 1:

Select the Mode Page by rotating the left outer knob

Turn the left inner knob to select OBS or LEG 

Press ENTER to activate the mode

Method 2:

Press the Remote OBS/LEG switch/annunciator to change modes

If the Remote OBS/LEG Switch/Annunciator is installed, the KLN 90B will sense its presence, on 
turn-on, and disallow selection of OBS/LEG modes by the KLN90B front panel controls. If the re-
mote switch is not installed, the front panel controls will function as before.

LIGHTING Honeywell 

P/N 

     or

Honeywell P/N

28 V 

031-00785-0778 or 

031-00785-0763

14 V 

031-00785-0779 or 

031-00785-0764

5 V 

031-00785-0780 or 

031-00785-0765

(Eaton Series 582)

Summary of Contents for BENDIX/KING KLN 90B

























































































































































Reviews:

No comments