Honeywell AlarmNet GSMHS, Installation And Setup Manual

Page: 45 / 56

B-1
Appendix B: Central Station Messages
ECP Mode Zone and 4204 Modes
Alarm Condition
Alarm Code Restore Code Alarm Code Restore Code
Power On / Reset E339 C08xx* 5551 5555 6
Tamper
(Compromise Indication)
E341 C08xx* R341 C08xx* 5555 5551 7 5555 5553 7
Power Loss E337 C08xx* R337 C08xx* 1555 5555 6 3555 5555 6
Low Battery E338 C08xx* R338 C08xx* 5155 5555 6 5355 5555 6
Battery Charger Failure E314 C08xx* R314 C08xx* 5155 5555 1 5355 5555 1
ECP Supervision
(Compromise Indication)
E355 C0000 R355 C0000 5555 5515 5 5555 5535 5
Communication Path Supervision R350 C0951 5555 5553 5
Swinger Suppression 0D00 0005 0
Telco (Compromise Indication) 5555 5155 6 5555 5355 6
Open/Close 2 sent in selected
zone 4 sent in selected
zone
Test 5555 5555 9 5555 5555 9
Specific to RESIDENTIAL / COMMERCIAL Control Panels (Such as the VISTA-10P, 15P, and 20P series.)
Communicator Trouble (low battery,
ECP buss, network)
(Possible Compromise Indication)
E353 C08xx*
◊
R353 C08xx*
‡
Radio Fault
E353 0 1xx*
‡
R353 0 1xx*
‡
Specific to COMMERCIAL Control Panels (Such as the VISTA-128/250 series.)
Communicator Trouble (low battery,
ECP buss, network)
(Possible Compromise Indication)
E333 C08xx*
‡
R333 C08xx*
‡
Radio Loss of Signal
(Possible Compromise Indication)
E357 0 8xx*
†
R357 0 8xx*
‡
or
R380 0 8xx*
‡
Radio Fault (low battery, tamper,
ECP Buss)
E333 0 8xx*
‡
R333 0 8xx*
‡
AlarmNet Messages
Communication failure.
(Possible Compromise Indication)
5555 1555 6 5555 3555 6
Authorized Radio Substitution 00D0 010C 0
Unauthorized Radio Substitution
Attempt 00D0 010E 0
Service Termination 00D0 020E 0
* xx = GSMHS Device Address
† = Message is sent by dialer only.
‡ = Message is sent by dialer and radio.
◊ = Message is sent by dialer only, or dialer and radio, depending on failure.