Honeywell AlarmNet GSMHS, Installation And Setup Manual

Page: 29 / 56

Section 3: Programming the GSMHS
3-15
PROMPTS
ZONE
TRIG.
4204/
2-4204
ENTRY OPTIONS DESCRIPTION
38
Delay Zn3 (secs)
(00)
 
[01-15]
[00] = no
delay Defines the reporting delay in seconds for
zone 3.
UL: Must be set to “00.”
39
Rpt Zn3 ONLY if
Armed (N)_
 
[Y], [N]
Reports alarms on zone 3 ONLY if the
conditional zone (zone 7 in zone trigger mode;
zone 4 in 4204 mode; zone 8 in 2-4204 mode) is
triggered (armed).
If [N], always reports alarms on zone 3.
4204 mode: If any zone is programmed to
"Report Only if Armed," skip to Prompt 50:
"Enable Zn6."
40 Zn4 Trigger Type
(V+)_

 (EOLR)
 (V+)

(V–)
Selects the triggering method for this zone
input.
Press the [space] key to scroll through choices.
41
Invert Zn4 Y/N
(N)_

[Y], [N] Inverts the alarm and normal states of the
zone 4 trigger; otherwise uses normal input
signal.
42
Restore Zn4 Y/N
(Y)_
 
[Y], [N] Enables restore reporting for zone 4.
UL: Must be set to “Y.”
43
Delay Zn4 (secs)
(00)
 
[01-15]
[00] = no
delay Defines the reporting delay in seconds for
zone 4.
UL: Must be set to “00.”
44
Rpt Zn4 ONLY if
Armed (N)_
 2-
4204
only
[Y], [N]
Reports alarms on zone 4 ONLY if the
conditional zone (zone 7 in zone trigger mode;
zone 8 in 2-4204 mode) is triggered (armed).
If [N], always reports alarms on zone 4.
45 Zn5 Trigger Type
(V+)_

 (EOLR)
 (V+)
 (V–)
Selects the triggering method for this zone
input.
Press the [space] key to scroll through choices.
46
Invert Zn5 Y/N
(N)_

[Y], [N] Inverts the alarm and normal states of the
zone 5 trigger; otherwise uses normal input
signal.
47
Restore Zn5 Y/N
(Y)_

2-
4204
only
[Y], [N] Enables restore reporting for zone 5.
UL: Must be set to “Y.”
48
Delay Zn5 (secs)
(00)_
 2-
4204
only
[01-15]
[00] = no
delay
Defines the reporting delay in seconds for
zone 5.
UL: Must be set to “00.”
49
Rpt Zn5 ONLY if
Armed (N)_
 2-
4204
only
[Y], [N]
Reports alarms on zone 5 ONLY if the
conditional zone (zone 7 in zone trigger mode;
zone 8 in 2-4204 mode) is triggered (armed).
If [N], always reports alarms on zone 5.
50
Enable Zn6 Y/N
(N)_
4204
only
[Y], [N] Enables alarm reporting for zone 6.
If [N], skip to Prompt 56: "Enable Zn7."
51 Zn6 Trigger Type
(V+)_
 4204
only

(EOLR)
 (V+)

(V–)
Selects the triggering method for this zone
input.
Press the [space] key to scroll through choices.
52 Invert Zn6 Y/N
(N)_
 4204
only
[Y], [N] Inverts the alarm and normal states of the
zone 6 trigger; otherwise uses normal input
signal.