background image

Sensing and Control 
Honeywell 

1985 Douglas Drive North

Golden Valley, MN 55422

sensing.honeywell.com

 

50081314-1-EN  IL50  GLO
December 2012
© 2012 Honeywell International Inc. All rights reserved.

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being free of 

defective materials and faulty workmanship. Honeywell’s stan-

dard product warranty applies unless agreed to otherwise by 

Honeywell in writing; please refer to your order acknowledgement 

or consult your local sales office for specific warranty details. If 

warranted goods are returned to Honeywell during the period of 

coverage, Honeywell will repair or replace, at its option, without 

charge those items it finds defective. 

The foregoing is buyer’s 

sole remedy and is in lieu of all other warranties, expressed 
or implied, including those of merchantability and fitness for 
a particular purpose. In no event shall Honeywell be liable for 
consequential, special, or indirect damages.

While we provide application assistance personally, through our 

literature and the Honeywell web site, it is up to the customer to 

determine the suitability of the product in the application.
Specifications may change without notice. The information we 

supply is believed to be accurate and reliable as of this printing. 

However, we assume no responsibility for its use.

Limitless™ WLS Series 

Single Switch Adapter

ISSUE 1

  

 

50081314

SALES AND SERVICE

Honeywell serves its customers through a worldwide network of 

sales offices, representatives and distributors. For application 

assistance, current specifications, pricing or name of the nearest 

Authorized Distributor, contact your local sales office or:

E-mail: [email protected]

Internet: sensing.honeywell.com/sensing

Phone and Fax:

Asia Pacific 

+65 6355-2828

 

 

+65 6445-3033 Fax

Europe   

+44 (0) 1698 481481

 

 

+44 (0) 1698 481676 Fax

Latin America 

+1-305-805-8188

  +1-305-883-8257 

Fax

USA/Canada 

+1-800-537-6945

  +1-815-235-6847

  +1-815-235-6545 

Fax

Summary of Contents for 50081314














Reviews: