Additional Features: Removable Shelves
Additional Features: Removable Shelves
Additional Features: Removable Shelves
Additional Features: Removable Shelves
Additional Features: Removable Shelves
Home and Office Security Safes
Shelves
Shelves
Shelves
Shelves
Shelves
Removable Shelf (
Removable Shelf (
Removable Shelf (
Removable Shelf (
Removable Shelf (
Model 2054D only
Model 2054D only
Model 2054D only
Model 2054D only
Model 2054D only
)))))
To remove the shelf, simply lift it up and tilt it on a sufficient angle to provide
clearance for removal.
Adjustable & Removable Shelves (
Adjustable & Removable Shelves (
Adjustable & Removable Shelves (
Adjustable & Removable Shelves (
Adjustable & Removable Shelves (
Models 2084D & 2118D
Models 2084D & 2118D
Models 2084D & 2118D
Models 2084D & 2118D
Models 2084D & 2118D
)))))
These models are designed with 5 position adjustable shelves to allow greater
flexibility and further accommodate your particular security storage needs.
To Install:
To Install:
To Install:
To Install:
To Install:
Your Shelf and Shelf Support Clips have been
shipped inside your safe and wrapped for protection
from damage during shipping.
1. Remove Shelf and (4) Shelf Support Clips
from protective wrapping.
2. Determine the desired position of your shelf
and note the corresponding Support Guide
Slots (2 on each side of interior walls) that
are best suited to support the shelf in that
position.
3. Install the (4) Shelf Support Clips in the same
position on all four support guides.
4. Install shelf into position by placing it inside
the safe (tilting if necessary) at a point
above the desired position.
5. Once inside, lower it into position until
resting on Shelf Support Clips.
To change the position of the shelf:
To change the position of the shelf:
To change the position of the shelf:
To change the position of the shelf:
To change the position of the shelf:
Simply remove the shelf and reposition the (4) shelf
support clips by sliding them up and out of the
support slots and reinstalling them into the new
positions. Then reinstall shelf as described above.
SUPPORT
GUIDES
5
55
55
Important:
Important:
Important:
Important:
Important: REMOVING SHELF
REMOVING SHELF
REMOVING SHELF
REMOVING SHELF
REMOVING SHELF
If you remove the shelf, it is strongly
recommended that you
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
DISCARD
DISCARD
DISCARD
DISCARD
DISCARD
it. You may lay the shelf
flat in the bottom of the safe to
assure full flexibility in the future.
8
88
88
Customer Support
Customer Support
Customer Support
Customer Support
Customer Support
Your Safe’s Unique Identification Numbers
Your Safe’s Unique Identification Numbers
Your Safe’s Unique Identification Numbers
Your Safe’s Unique Identification Numbers
Your Safe’s Unique Identification Numbers
When contacting Customer Service, you should be prepared to supply some
important information that specifically identifies your safe. This information is
extremely important to assuring prompt and accurate assistance.
It is strongly recommended that you identify and record the following
information in the “Identification Record” form located on the inside back
cover of this manual.
Model #
Model #
Model #
Model #
Model #
The Honeywell Home and Office Security Safes product line consists of many
different models, each identified by a specific model #. Every model is
manufactured with unique capabilities and features that may require specific
solutions to a variety of difficulties that occasionally occur.
Serial #
Serial #
Serial #
Serial #
Serial #
Each Individual safe is assigned a unique serial # when it is manufactured.
This # allows our Customer Service Specialists to define many unique factors
that will enable them to provide you with the best assistance.
Key #
Key #
Key #
Key #
Key #
The key # is necessary to identify the specific configuration of the key and lock
cylinder components of your safe. If a key becomes damaged or misplaced,
the key # is absolutely required to provide you with a replacement key.
Locating Serial # & Model #
Locating Serial # & Model #
Locating Serial # & Model #
Locating Serial # & Model #
Locating Serial # & Model #
Most Honeywell safes include a metallic or gray tag (with numbers and or
letters) affixed to one of the external surfaces (most often on front or right
side). This tag contains the serial # and selected models include a similar tag
containing the model #. If your safe does not include a model # tag and you
have not discarded the package, you can find the model # located near the
bottom of the front label.
Locating Key #
Locating Key #
Locating Key #
Locating Key #
Locating Key #
The key numbers are engraved on the keys and around the lock cylinder.
Important:
Important:
Important:
Important:
Important: DO NOT REMOVE TAGS
DO NOT REMOVE TAGS
DO NOT REMOVE TAGS
DO NOT REMOVE TAGS
DO NOT REMOVE TAGS
PLEASE
PLEASE
PLEASE
PLEASE
PLEASE
do not remove the serial # or model # tags or any
other identification tags or warning labels from the safe.
You may need these numbers for future reference.
