3
33
33
Step 3.
Step 3.
Step 3.
Step 3.
Step 3.
Programming a Passcode
Programming a Passcode
Programming a Passcode
Programming a Passcode
Programming a Passcode
Use the digital keypad to program your own 2 to 8
digit passcode. You may choose or change your
personal passcode at any time by following these steps:
1. Locate the memory button marked on the
inside of the door.
2. Using a pen or other blunt tip, quickly push
and release the memory button.
3.
After you hear a
“beep
beep
beep
beep
beep”
, the LCD display will read
“OPEN” and you may begin entering your personal
code (from 2 to 8 numbers) followed by the
#
#
#
#
#
button.
4. Next, you will hear a longer
“beep
beep
beep
beep
beep”
and the LCD
display will read “CODE”, indicating that your
personal code has been successfully programmed
and can now be used to open your safe.
Programming A Passcode
Programming A Passcode
Programming A Passcode
Programming A Passcode
Programming A Passcode
Home and Office Security Safes
Important:
Important:
Important:
Important:
Important: SECURITY LOCKOUT PERIODS
SECURITY LOCKOUT PERIODS
SECURITY LOCKOUT PERIODS
SECURITY LOCKOUT PERIODS
SECURITY LOCKOUT PERIODS
For added security, the safe will automatically “Lockout”
entry for 5 minutes after three attempts to open with an
invalid passcode. After three more invalid attempts within
this time period, a one-hour “lockout” period will begin.
During these “Lockout” periods, entry
MUST BE MADE
MUST BE MADE
MUST BE MADE
MUST BE MADE
MUST BE MADE
using the emergency override key.
LCD Display Menu
LCD Display Menu
LCD Display Menu
LCD Display Menu
LCD Display Menu
Your new Digital Firesafe features an LCD display to assist in programming
and operating your safe. A menu of the codes is as follows:
Ready to enter your passcode
Passcode successfully programmed
Correct passcode entered
Incorrect passcode entered
Batteries (“AA”) must be replaced
MEMORY
BUTTON
LCD
DISPLAY
Appropriate Use of Your Safe
Appropriate Use of Your Safe
Appropriate Use of Your Safe
Appropriate Use of Your Safe
Appropriate Use of Your Safe
Honeywell fire safes protect paper records and many other valuables.
Testing shows that the interior temperature remains below 350°F
(177°C) for 1 or 2 hours (depending on model) during a fire up to
1700°F (927°C) when used properly. Your safe must be closed and
latched in order to properly protect its contents from fire.
Your safe is guaranteed not to develop mildew from moisture
originating in the safe’s insulating material for five years. However, if
the safe is stored in an area of high moisture content (such as near the
ocean or in a tropical climate), moisture from the environment may
become trapped inside the safe. If this applies to you, it is
recommended that you open the safe on a regular basis to promote
air circulation.
Safe Care and Maintenance
Safe Care and Maintenance
Safe Care and Maintenance
Safe Care and Maintenance
Safe Care and Maintenance
When properly maintained, your safe will continue to accurately read the
authorized passcode for many years. In order to ensure optimum
performance of your safe, please follow these simple precautions:
Replace Batteries
Replace Batteries
Replace Batteries
Replace Batteries
Replace Batteries
- For best results and performance, we
recommend that the batteries be replaced at least once a year.
Clean Hands
Clean Hands
Clean Hands
Clean Hands
Clean Hands
- - - - - Do not attempt to operate digital keypad if your hands
have excessive dirt, debris, or liquids on them. Under normal
circumstances It is not necessary to wash your hands before using the
safe.
Clean Safe
Clean Safe
Clean Safe
Clean Safe
Clean Safe
- - - - - To clean the outside surface of your safe, it is
recommended that you use a mild cleaner (i.e. window cleaner) to
avoid scratching or discoloring the surface. Do not use abrasive
cleansers.
10
10
10
10
10
Use, Care & Maintenance
Use, Care & Maintenance
Use, Care & Maintenance
Use, Care & Maintenance
Use, Care & Maintenance
