Honeywell 1710650, Instructions Manual

Page: 6 / 55

EN-3
Mask connector
•
Cut the connector fixing ring with a pair of pincers.
•
Change the connector and make sure the face blank rubber is correctly positioned.
•
Tighten the new fastening collar with collar pliers (supplied by the manufacture) or possibly with a pair of nippers.
Eye piece
•
Unscrew the bolts holding the visor frame.
•
Remove the visor from the face blank groove and check that it is clean.
•
Ease new visor into groove and ensure it is correctly positioned all around.
•
Position the visor frame and refit the fastening bolts.
Speech diaphragm and O-ring seal
•
Unscrew the speech case lid with the key (supplied by the manufacture).
•
Remove the speech diaphragm.
•
Change the O-ring seal and lubricate with silicon grease.
•
Position the speech diaphragm in the box and screw lid back on.
Body harness
•
Pull front and side straps free of the reels while pushing the buckle clips forward.
•
Pull the ends of the new strap through the reels already fitted on the buckles.
Flange and calibrated valve spring (mask called: "positive pressure")
These operations require bench calibration of the valve. Only personnel that have taken a training course by Honeywell Respiratory Safety
Products are qualified to carry out this maintenance.
LIST OF SPARE PARTS (Figure 1)
Item Description Code
1 Black EPDM inner mask for valve lug
< 07/2002 //
1 Yellow Silicone inner mask for valve
lug < 07/2002 //
1 Black EPDM inner mask for offset seat
> 07/2002 1710115
1 Yellow Silicone inner mask for offset
seat > 07/2002 1710117
2 Scratch-resistant PC visor (marked
CL3) 1710256
3 Yellow visor frame with nuts and
screws 1710405
4 Harness with overmoulded rectangle 1710019
4 Harness without overmoulded
rectangle
1710021
5 Complete clip-on connector for valve
SA 5000 1710402
6 Yellow exhalation valve casing,
calibrated for SA 5000
1710403
7 Speech case 1701366
8 Connector fixing ring for mask
connector
1702248
9 Inhalation valve pin for inner mask
< 07/2002 1710120
10 Inserted seat and inhalation valve for
inner mask > 07/2002 1715071
11 Nut for speech case and valve box 1701417
12 Flange ring for calibrated valve 1701317
13 O-ring for clip-on connector 1710319
14 Speech diaphragm Ø 54 1705205
15 O-ring for speech diaphragm 1705211
16 Neck strap with openings 1710317
17 Roller rectangle 1710050
OPTIONS/ACCESSORIES
Code Description
1741055
PANO positive pressure speech maintenance
kit < 07/2002:
1 seal 1705211 + 1 seal 1710319 + 2 valves
1710120 + 1 collar 1701317 + 1 spring
1701318
1701381 Key for valve box nut or speech case
1701384 Key for speech case lid
1022300 Spectacle rims for mask
1710297
Set of connecting flanges (complete) for F1,
F1A and F1SL helmets.
1710323 Complete support net
1741059
PANO positive pressure speech maintenance
kit > 07/2002:
1 seal 1 1 seal 1 2 seats and
valves 1715071 + 1 collar 1701317 + 1 spring
1701318
1772500 Rigid mask storage case
1779061 ALTUSIL oilcan (product for cleaning of visors)
1779065 EPI-US, 5 litre can
1779502 Pliers for mask connector clamps
1792132 Valve and Medium-Pressure calibration
inspection bench
1792100 Inflatable head inspection bench