Mini PTZ Dome Camera User Guide
Document 800-06705 - Rev A - 12/10
41
Swing Setup
z
Swing Number
[1~8]
Selects a Swing number to edit. If the selected
Swing is not defined, NOT USED is displayed in the
1st Position and the 2nd Position.
z
1st Position
2nd Position
[PRESET 1~128]
Sets the two positions for a Swing function. If the
selected Preset is not defined, UNDEFINED is
displayed as shown below.
When a Swing function runs, the camera moves
from the Preset assigned as the first point to the
Preset assigned as the second point in a clockwise
direction. Then the camera moves from the Preset
assigned as the second point to the Preset
assigned as the first point in a counterclockwise
direction. Where the preset assigned as the first
point and the Preset assigned as the second point
are same, or only one Preset position is assigned,
the camera turns on its axis by 360
°
in a clockwise
direction and then it turns on its axis by 360
°
in a
counterclockwise direction.
z
Swing Speed
[1
°
/sec. ~180
°
/sec.]
Defines Swing speed between the two Preset
positions from 1
°
/sec to 180
°
/sec
z
Clear Swing
[CANCEL/OK]
Deletes the data of the selected Swing.
z
Run Swing
Runs Swing for test purposes to check if it works
properly.
SWING SETUP
------------------------
SWING NO. 1
1ST POS. PRESET5
2ND POS. NOT USED
UNDEFINED
SWING SETUP
------------------------
SWING NO. 1
1ST POS. NOT USED
2ND POS. NOT USED
SWING SPEED 30/SEC
CLEAR SWING CANCEL
RUN SWING
BACK
EXIT